KWI X3 Clutch Springs

KWI X3 Clutch Springs

from 38.50

900 HO KWI Black Spring- This spring was designed for your stock or tuned Can Am Maverick X3 900HO. It recovers performance by getting your RPMS into the heart of the powerband. Youll run the secondary spring in position # 3 with this spring. Stock clutching is very conservative and is responsible for wheel HP loss especially if you install larger tires or a tune. 

KWI Blue Primary Spring (PBL)- This is the KWI Can Am X3 primary spring designed for 600 rpm over stock. Typically used for High HP tunes in the Sand dunes, High Hp tunes or if you run extremely large tires. Also a great very high altitude spring.  You WILL NEED the governor cup puller special tool to install this spring, our KWI clutch tool kit has everything you will need for complete disassembly and reassembly of your Can Am clutches.

KWI Blue/Orange Primary Spring (PBL)- This is the KWI Can Am X3 PBL-OR primary spring designed for 300 rpm over stock and flattens out the shift curve. Also a great high altitude spring for high HP vehicles. You WILL NEED the governor cup puller special tool to install this spring, our KWI clutch tool kit has everything you will need for complete disassembly and reassembly of your Can Am clutches.

KWI Blue Secondary Spring (SBL)- This is the KWI Can Am X3 SBL secondary spring designed to hold the belt from slipping and with our custom torsion rate to optimize the shift curve of modified ECU's and motors . Our KWI clutch tool kit has everything you will need for complete disassembly and reassembly of your Can Am clutches.

Don’t forget the Clutch Tool

Spring:
Quantity:
Add To Cart